84 Sapera LT X64-AN Quad User's ManualFigure 44: CamExpert: Live acquisition window If you have multiple cameras connected to the X64-AN Quad, select each board server in turn toverify live grab from each camera. Use the File-Save dialog to save this camera configuration file (*.ccf) with user enteredinformation. CamExpert provides information for each field based on the file originally loaded.Modify the fields such as camera mode and board configuration, to describe the parameter setup.Modify the file name and click Save. The ccf file is located in the default Sapera user folder.Overview of Basic Timing ParametersCamExpert only shows parameters applicable to the acquisition board and camera type. Whenconfiguring parameters for a new camera start by selecting or entering the basic horizontal timingparameters and pixel clock frequency as defined by the camera manufacturer.Following is a brief overview of the basic timing parameters required for interfacing any camera. Video Standard: An analog camera is either RS170/NTSC or CCIR/PAL or Non Standard. Thegroup of Non Standard cameras covers all cameras that are not one of the basic TV standards. Videocapture of such cameras is only limited by the capabilities of the frame grabber hardware used. Image Sensor readout: The JAI CV-A11 output is full frame progressive scan video. Basic TVstandard video is interlaced.
