Danfoss AKD 5001 Manual
                                                                                                                            | |
Contents
| 
AKD 5000Operation of theAKD Control panel (LCP)The front of the frequency converter features acontrol panel - LCP (Local Control Panel), whichmakes up a complete interface for operation andmonitoring of the AKD 5000 Series.The control panel is detachable and can - as analternative - be installed up to 3 metres away fromthe frequency converter, e.g. on a front panel,by means of a mounting kit option.The functions of the control panel can bedivided into three groups:• display• keys for changing program parameters• keys for local operationAll data are indicated by means of a 4-linealpha-numeric display, which in normal operationis able to show 4 measurements and 3 operatingconditions continuously. During programming, all theinformation required for quick, effective parameterSetup of the frequency converter will be displayed. Asa supplement to the display, there are three LEDs forvoltage (power or 24 V external), warning and alarm.All program parameters of the frequency converter canbe changed immediately from the control panel, unlessthis function has been blocked via parameter 018. Control panel - displayThe LCD-display has rear lighting and a total of 4alpha-numeric lines together with a box that showsthe direction of rotation (arrow) and the chosenSetup as well as the Setup in which programmingis taking place if that is the case.12345678 SETUP1123456789012345678901234567890123456789012345678901234567890175ZA443.101st line2nd line3rd line4th line1st line shows up to 3 measurements continuouslyin normal operating status or a text whichexplains the 2 nd line.2nd line shows a measurement with relatedunit continuously, regardless of status (exceptin the case of alarm/warning).3rd line is normally blank and is used in the menumode to show the selected parameter number orparameter group number and name.4th line is used in operating status for showing astatus text or in data change mode for showing themode or value of the selected parameter.An arrow indicates the direction of rotation of themotor. Furthermore, the Setup which has beenselected as the Active Setup in parameter 004 isshown. When programming another Setup thanthe Active Setup, the number of the Setup whichis being programmed will appear to the right. Thissecond Setup number will flash. Control panel - LEDsAt the bottom of the control panel is a red alarm LED anda yellow warning LED, as well as a green voltage LED.MG.50.R3.02 - 43 |
Related manuals for Danfoss AKD 5001
manualsdatabase
Your AI-powered manual search engine