Danfoss AKD 5001 Manual
                                                                                                                            | |
Contents
| 
AKD 5000Operation of theAKD Parameter selectionThe selection of parameter is effected by means of the[+/-] keys. The following parameters are accessible:PPPPoooossss....:::: NNNNoooo....:::: PPPPaaaarrrraaaammmmeeeetttteeeerrrr:::: UUUUnnnniiiitttt::::1 001 Language2 102 Motor output [kW]]3 103 Motor voltage [V]4 104 Motor frequency [Hz]5 105 Motor current [A]6 106 Rated motor speed [rpm]7 107 Automatic motor adaptation,AMA8 204 Minimum reference [Hz]9 205 Maximum reference [Hz]10 207 Ramp-up time 1 [sec.]11 208 Ramp-down time 1 [sec.]12 002 Local/remote control13 003 Local reference Menu modeThe Menu mode is started by pressing the [MENU] key,which produces the following read-out on the display:50.0 HzFREQUENCY0 KEYB.&DISPLAYLine 3 on the display shows the parametergroup number and name. Parameter selectionIn the Menu mode the parameters are dividedinto groups. Selection of parameter group iseffected by means of the [<>] keys.The following parameter groups are accessible:GGGGrrrroooouuuupppp nnnnoooo.... PPPPaaaarrrraaaammmmeeeetttteeeerrrr ggggrrrroooouuuupppp::::0 Operation & Display1 Load & Motor2 References & Limits3 Inputs & Outputs4 Special functions5 Serial communication6 Technical functions7 Application Options8 Fieldbus Profile9 Fieldbus CommunicationWhen the desired parameter group has beenselected, each parameter can be chosen bymeans of the [+/-] keys:FREQUENCY001 LANGUAGEENGLISH50.0 HzThe 3rd line of the display shows the parameternumber and name, while the status/value of theselected parameter are shown in line 4. Changing dataRegardless of whether a parameter has been selectedunder the Quick menu or the Menu mode, theprocedure for changing data is the same.Pressing the [CHANGE DATA] key gives access tochanging the selected parameter, following which theunderlining in line 4 will flash on the display.The procedure for changing data depends onwhether the selected parameter represents anumerical data value or a text value. Changing a text valueIf the selected parameter is a text value, the text valueis changed by means of the [+/-] keys.50.0 HzFREQUENCY001 LANGUAGEENGLISHMG.50.R3.02 - 47 |
Related manuals for Danfoss AKD 5001
manualsdatabase
Your AI-powered manual search engine