Danfoss VLT AQUA FC 202 Operating Instructions Manual

Also see for VLT AQUA Drive FC 202: Service guide Installation guide Installation guide Operating guide Installation guide

Contents

4 How to operate the frequency converter4.1 Ways of OperationThe frequency converter can be operated in 3 ways:1. Graphical Local Control Panel (GLCP), see 6.1.22. Numeric Local Control Panel (NLCP), see 6.1.33. RS-485 serial communication or USB, both for PCconnection, see 6.1.4If the frequency converter is fitted with fieldbus option,refer to relevant documentation.4.1.1 How to operate graphical LCP (GLCP)The following instructions are valid for the GLCP (LCP 102).The GLCP is divided into 4 functional groups:1. Graphical display with Status lines.2. Menu keys and indicator lights (LED's) - selectingmode, changing parameters and switchingbetween display functions.3. Navigation keys and indicator lights (LEDs).4. Operation keys and indicator lights (LEDs).Graphical display:The LCD-display is back-lit with a total of 6 alpha-numericlines. All data is displayed on the LCP which can show upto five operating variables while in [Status] mode.Display lines:a. Status line: Status messages displaying icons andgraphics.b. Line 1-2: Operator data lines displaying data andvariables defined or chosen by the user. Bypressing the [Status] key, up to one extra line canbe added.c. Status line: Status messages displaying text.The display is divided into 3 sections:Top section (a)shows the status when in status mode or up to 2 variableswhen not in status mode and in the case of Alarm/Warning.Autoon ResetHandon OffStatus QuickMenuMainMenuAlarmLogBackCancelInfoOKStatus 1(0)1234rpm 10,4A 43,5HzRun OK43,5HzOnAlarmWarn.130BA018.131234bacIllustration 4.1 Overview of LCPThe number of the Active Set-up (selected as the ActiveSet-up in 0-10 Active Set-up) is shown. When programmingin another Set-up than the Active Set-up, the number ofthe Set-up being programmed appears to the right inbrackets.Middle section (b)shows up to 5 variables with related unit, regardless ofstatus. In case of alarm/warning, the warning is showninstead of the variables.It is possible to toggle between three status read-outdisplays by pressing the [Status] key.Operating variables with different formatting are shown ineach status screen - see below.Several values or measurements can be linked to each ofthe displayed operating variables. The values/measurements to be displayed can be defined viaHow to operate the frequenc... VLT AQUA Drive FC 202 Operation Instructions70 MG20P402 - Rev. 2013-12-1644