More approvals and certifications are available. Contact the local Danfoss office or partner. Drives of voltage T7 (525–690 V) are ULcertified for only 525–600 V.Thermal memory retention requirementThe drive complies with UL 61800-5-1 thermal memory retention requirements. For more information, refer to the Motor ThermalProtection section in the product-specific design guide.N O T I C EOUTPUT FREQUENCY LIMITFrom software version 6.72 onwards, the output frequency of the drive is limited to 590 Hz due to export control regulations.Software versions 6.xx also limit the maximum output frequency to 590 Hz, but these versions cannot be flashed, that is,neither downgraded nor upgraded.ADN-complianceFor more information on compliance with the European Agreement concerning International Carriage of Dangerous Goods by InlandWaterways (ADN), refer to the ADN-compliant Installation section in the product-specific design guide.1.6 DisposalDo not dispose of equipment containing electrical components together with domestic waste. Collect it separately in accordance withapplicable local regulations.IntroductionOperating Guide | VLT® AutomationDrive FC 302AQ275652476278en-000101 / 130R07098 | Danfoss A/S © 2019.12
