Danfoss VLT HVAC Drive FC 102 Programming Manual

Also see for VLT HVAC Drive FC 102: Operating instructions Service guide Programming guide Installation guide Installation guide

Contents

2 How to Programme2.1 Local Control Panel2.1.1 How to Operate Graphical LCP (GLCP)The GLCP is divided into 4 functional groups:1. Graphical display with status lines.2. Menu keys and indicator lights (LEDs) - selectingmode, changing parameters and switchingbetween display functions.3. Navigation keys and indicator lights (LEDs).4. Operation keys and indicator lights (LEDs).Graphical displayThe LCD display is backlit with a total of 6 alpha-numericlines. All data is displayed on the LCP, which can show upto 5 operating variables while in Status mode.Display lines:a. Status lineStatus messages displaying icons and graphics.b. Line 1–2Operator data lines displaying data and variablesdefined or selected by the user. Press [Status] toadd 1 extra line.c. Status lineStatus messages displaying text.Autoon ResetHandon OffStatus QuickMenuMainMenuAlarmLogBackCancelInfoOKStatus 1(0)1234rpm 10,4A 43,5HzRun OK43,5HzOnAlarmWarn.130BA018.131234bacIllustration 2.1 LCPThe display is divided into 3 sections:Top section(a) shows the status when in Status mode, or up to 2variables when not in Status mode, and in the case ofalarm/warning.The number of the active set-up (selected as the activeset-up in parameter 0-10 Active Set-up) is shown. Whenprogramming in another set-up than the active set-up, thenumber of the set-up being programmed appears to theright in brackets.Middle section(b) shows up to 5 variables with related unit, regardless ofstatus. In case of alarm/warning, the warning is showninstead of the variables.Bottom section(c) always shows the state of the frequency converter instatus mode.Press [Status] to toggle between 3 status readout displays.How to Programme VLT® HVAC Drive FC 10210 Danfoss A/S © 03/2015 All rights reserved. MG11CE0222