Danfoss vlt AQUA Instruction Manual

Also see for vlt aqua: Instructions Design guide Operating instructions Design guide Operating instructions

The Function Set-up parameters are grouped in the following way:Q3-1 General SettingsQ3-10 Clock Settings Q3-11 Display Settings Q3-12 Analog Output Q3-13 Relays0-70 Set Date and Time 0-20 Display Line 1.1 Small 6-50 Terminal 42 Output Relay 1 ⇒ 5-40 Function Relay0-71 Date Format 0-21 Display Line 1.2 Small 6-51 Terminal 42 Output Min Scale Relay 2 ⇒ 5-40 Function Relay0-72 Time Format 0-22 Display Line 1.3 Small 6-52 Terminal 42 Output Max Scale Option relay 7 ⇒ 5-40 FunctionRelay0-74 DST/Summertime 0-23 Display Line 2 Large Option relay 8 ⇒ 5-40 FunctionRelay0-76 DST/Summertime Start 0-24 Display Line 3 Large Option relay 9 ⇒ 5-40 FunctionRelay0-77 DST/Summertime End 0-37 Display Text 10-38 Display Text 20-39 Display Text 3Q3-2 Open-loop SettingsQ3-20 Digital Reference Q3-21 Analog Reference3-02 Minimum Reference 3-02 Minimum Reference3-03 Maximum Reference 3-03 Maximum Reference3-10 Preset Reference 6-10 Terminal 53 Low Voltage5-13 Terminal 29 Digital Input 6-11 Terminal 53 High Voltage5-14 Terminal 32 Digital Input 6-14 Terminal 53 Low Ref/Feedb. Value5-15 Terminal 33 Digital Input 6-15 Terminal 53 High Ref/Feedb. ValueQ3-3 Closed-loop SettingsQ3-30 Feedback Settings Q3-31 PID Settings1-00 Configuration Mode 20-81 PID Normal/Inverse Control20-12 Reference/Feedb.Unit 20-82 PID Start Speed [RPM]3-02 Minimum Reference 20-21 Setpoint 13-03 Maximum Reference 20-93 PID Proportional Gain6-20 Terminal 54 Low Voltage 20-94 PID Integral Time6-21 Terminal 54 High Voltage6-24 Terminal 54 Low Ref/Feedb Value6-25 Terminal 54 High Ref/Feedb Value6-00 Live Zero Timeout Time6-01 Live Zero Timeout FunctionVLT® AQUA DriveInstruction Manual8 How to program the adjustable frequencydriveMG.20.M5.22 - VLT® is a registered Danfoss trademark 8-58