XPS Card Printer Driver User’s Guide 91Color Balance1. Evaluate the image for color balance. Does the card have a yellow cast or do photos have agreenish tint?If most of the card prints with the correct colors, consider using a graphics application tochange the logo or other part of the card that needs color improvement.2. Determine which color needs adjustment.Click the Up arrow to increase a color, orthe Down arrow to decrease the color. The Adjusted image shows the effect ofthe new setting. If changing the obvious color does notproduce the desired effect, try changingthe other two.3. Click Apply after each change to save it.4. To verify changes, do one of the following: Print one or more cards from your cardproduction software. Print a sample card from the PrinterProperties > Status page.5. Evaluate the appearance of the cards.6. Repeat these steps until the cards meet your requirements.7. Click Apply to save the new values.HINTS & T IPS The settings on the Color Adjustment page affect the color printing of all cards sent from thePC that uses the Card Printer Driver. Text and images formatted as black (K) are not affected by color adjustment. To return the Color Adjustment settings to their default values, click Restore Defaults.
