96 Card Design TasksPrinter Setup for Rewritable CardsPrinting rewritable cards on a printer that supports the rewrite option requires that the printer,Printer Manager, and the Card Printer Driver all are set up properly.Set Up the PrinterDo the following to prepare the printer to print rewritable cards:1. Open the printer cover and remove the print ribbon cartridge.2. Remove the print ribbon from the cartridge and set it aside.Make sure that the cleaning roller with the replaceable cleaning sleeve is installed.3. Return the print ribbon cartridge to the printer.4. Close the printer cover.5. Have rewritable cards available to insert into the printer.Refer to your printer’s User’s Guide for complete information about each of these steps.Set Up Printer ManagerUse Printer Manager to enable rewritable printing. Do the following to access Printer Managerand specify rewritable settings:1. Open the Windows Devices and Printers window.2. Right-click the XPS Card Printer iconand select Printer properties.3. Select the Printer Status tab.4. Confirm that the Printer Informationlist shows that the printer supportsRewritable Cards.5. Click Configure Printer to launchPrinter Manager.6. Log in as WebAdmin.
