XPS Card Printer Driver User’s Guide 95Debow the CardWhen you apply an overlay to a card, the card may become bowed slightly due to heat from thelaminator.Select the Debow card option on theLamination tab to use the debow mechanism inthe laminator to return the card to its propershape. Do not debow cards with a smart card chipor wireless antenna. The Debow card option is not checked bydefault. You must select the option aftersetting the lamination options. If you use ID software to specify laminationoptions, you can check the Debow cardoption on the Lamination tab to make surethat cards are debowed after they arelaminated. You also can use a debow escapeto debow the card. Refer to “LaminatorEscape” on page 112. The debow settings—such as the amount (distance) of debow, the direction of debow (up ordown), and the time the debow action is applied—are set in Printer Manager. You may needto print several cards to determine the best debow settings for your card type. Refer to yourprinter’s Installation and Administrator’s Guide for complete information about using PrinterManager.About TabThe About tab shows the Card Printer Driver version and any additional information about thedriver.
