XPS Card Printer Driver User’s Guide 75Apply a Second Layer of Retransfer MaterialThe CR805 retransfer card printer can apply a second layer of retransfer film to the card for addeddurability. The second layer does not contain any images, and is applied to provide addeddurability to the card.You also can use an escape to specify a second retransfer layer. Refer to “Apply a SecondRetransfer Layer Escape” on page 114.1. Open the Printing Preferenceswindow.2. On the Layout tab, click Advanced.3. Click Apply second layer of retransfermaterial and select an option fromthe drop-down list: Front side only—Applies asecond layer of retransfer film tothe front of the card. Both sides—Applies a secondlayer of retransfer film to boththe front and back of the card.4. Click OK to save the setting and close the Advanced Options window.5. On the Layout tab, click Apply. Click OK to close the Printing Preferences window.You cannot apply retransfer film over the magnetic stripe or signature panel onthe back side of the card. Do not request the Both sides option to apply a secondlayer of retransfer film if your card has a magnetic stripe or signature panel onthe back side. The second layer of film will be applied over those features andmake them unusable.
