SD260L/SD360/SD460 Card Printers User’s Guide 67149: Option not installedThe printer does not support the personalization being requested for the card. The card will becanceled.Change the card data to match the printer’s options and settings, or print to a printer that isconfigured to support the personalization being requested.Press the User button on the printer, or click OK on the PC to clear the message.H INTS & TIPSIn the card format, don’t include references to hardware that cannot be accessed by the system.For more information, refer to your ID software documentation or ask your system administrator.152: Insert new card side 2 up1. Turn a new card over end to end so side 2 is facing up.2. Insert the card in the printer.3. If the card is not immediately picked, press the printer’s USER button or click OK.Click Cancel on the PC if you want to cancel the card.153: Insert same card side 2 up1. Take the card from the printer and turn it over end to end so side 2 is facing up.2. Insert the card in the printer.3. If the card is not immediately picked, press the printer’s USER button or click OK.Click Cancel on the PC if you want to cancel the card.170: Insert new card side 1 up1. Insert a new card in the printer with side 1 facing up.2. If the card is not immediately picked, press the printer’s USER button or click OK.Click Cancel on the PC if you want to cancel the card.171: Insert same card side 1 up1. Take the card from the printer and turn it over end to end so side 1 is facing up.2. Insert the card in the printer.3. If the card is not immediately picked, press the printer’s USER button or click OK.Click Cancel on the PC if you want to cancel the card.
