68 Troubleshooting172: Insert cleaning card1. Insert cleaning card.2. If the card is not immediately picked, press the printer’s USER button or click OK.Click Cancel if you want to cancel the cleaning card.173: Improper shutdownAlways use the POWER button to power off the printer.Press and hold the USER button to set the printer to Ready.Click OK to clear the message.Laminator MessagesThe following messages display on the printer LCD panel when you are using an SD460 laminatingsystem. They also display in a message on the PC that issued the card print job.177: Laminator not availableThe printer and laminator cannot communicate. The card will be canceled.1. Make sure the data cable from the laminator to the printer is securely plugged in.2. Press the printer POWER button to power off the system.3. Press the POWER button again to power on the system.196: Laminator error criticalThe laminator has encountered a critical error. The card will be canceled.1. Press the printer POWER button to power off the system.2. Request service. The system must remain powered off.197: Laminator entry card problemThe card is not where it should be in the laminator.1. Open the laminator.2. Turn the knob to remove the card.3. Close the laminator.
