A-4 SD460 Laminating SystemInside the LaminatorThe SD460 system has one standard laminator, in the L1 position, with an optional secondlaminator in the L2 position. The laminators apply topcoat or patch overlay material to the card.Topcoat is a continuous film and patch is a die‐cut polyester shape. Both laminators can applyeither overlay type. Refer to “Laminator Overlay Materials” on page A‐6.Manual Advance Knobs The manual advance knobs move the card through thelaminator to remove it from the system. Use the knobs to cleara card jam.L1 Laminator (greencartridge)The L1 laminator cartridge holds overlay material and appliesit to the card.L2 Laminator (orangecartridge)The L2 laminator cartridge holds overlay material and appliesit to the card. The L2 laminator is optional.Laminator Access Door The access door provides access to the L1 and L2 laminators toload supplies or to clear a card jam.L2 Transport Access Door The L2 transport access door replaces the L2 laminatorcartridge if the optional L2 laminator is not installed. Open thedoor to access the laminator card transport.L2 LaminatorL2 TransportAccess DoorManual AdvanceKnobsL1 Laminator Laminator AccessDoor
