Customizing Configuration SettingsProduct Reference Guide 33Customizing Configuration SettingsConfigure Interface SettingsIf after scanning the interface barcode from the previous table, your installation requires you toselect options to further customize your reader, turn to the appropriate section for your interfacetype in "Configuration Using Barcodes" starting on page 37.• "RS-232 ONLY Interface" on page 41• "RS-232/USB-Com Interfaces" on page 46• "Keyboard Interface" on page 55• "USB-OEM Interface" on page 67• "IBM 46XX Interface" on page 69• "Wand Emulation Interface" on page 73Global Interface FeaturesSee "Global Interface Features" on page 39 for settings configurable by all interface types.Configuring Other FeaturesIf your installation requires different programming than the standard factory default settings,the following sections of this manual allow configuration of non-interface-specific settings youmight require:Reading Parameters: Reading Parameters include programming for scanning, beeper and LEDindicators and other universal settings.Code Selection: Includes options concerning the barcode label types (symbologies). Thesesettings allow you to enable/disable symbologies, set label lengths, require check digit, etc.Wireless Features: Contains programming options for RF and Bluetooth models only.Laser Features: Describes options and programming specific to laser models.Software Version TransmissionThe software version of the device can be transmitted over the RS-232 and Keyboard interfacesby scanning the following label.Transmit Software Version
