Datalogic Magellan 3450VSi Product Reference Manual

Contents

Datalogic Magellan 3450VSi Product Reference Manual Manual pdf 23 page image

2D Double Read Timeout Enter/Exit Programming ModeProduct Reference Guide 132D Double Read TimeoutThe 2D Double Read Timeout feature specifies the minimum allowable timewhich must pass before reading the same 2D label again (e.g. two identicalitems in succession).To set this feature:1. Scan the Enter/Exit Programming Mode bar code.2. Scan your selection from the bar codes below. You’ll need to cover anyunused bar codes on this and the facing page to ensure that the scannerreads only the bar code you intend to scan.3. Complete the programming sequence by scanning the Enter/Exit Pro-gramming Mode bar code.NOTE03DF1E(CR)2D Double Read Timeout = 300ms03DF28(CR)2D Double Read Timeout = 400ms03DF3C(CR)2D Double Read Timeout = 600msDEFAULT03DF46(CR)2D Double Read Timeout = 700ms03DF50(CR)2D Double Read Timeout = 800msIf the incidence of multiple reads is not acceptable, increase theTimeout setting to a higher value.