Enter/Exit Programming Mode QR Code Length Control272 Magellan™ 3450VSiQR Code Length 1, Length 2 Programming InstructionsIf QR Code Length Control is set to Fixed-Length decoding, this feature speci-fies QR Code first fixed length. If QR Code Length Control is set to Variable-Length decoding, this feature specifies the minimum label length.NOTELength 1 is the minimum label length if in variable lengthmode, or the first fixed length if in fixed length mode. Length 2is the maximum label length if in variable length mode, or thesecond fixed length if in fixed length mode. Length includesthe bar code's data characters only. Any value > 2710 will beconsidered to be 2710.To set this feature:1. Scan the ENTER/EXIT Programming Mode bar code.2. Scan the bar code, Set QR Code Length 1 on page 272 or Set QR CodeLength 2 on page 272 below. You’ll need to cover any unused bar codeson this and the facing page to ensure that the scanner reads only the barcode you intend to scan.3. Scan the appropriate digits from the Alpha-Numeric Keypad in Appendix Cthat represent the desired label length. The selectable range for thisoption is 0001 to 2710. Pad all numbers with leading zeros to yield a four-digit entry (001-02710).4. Complete the programming sequence by scanning the ENTER/EXIT Pro-gramming Mode bar code.Default setting for this feature = 000103DA(CR)Set QR Code Length 103DB(CR)Set QR Code Length 2Default setting for this feature = 0A96
