Length ControlProduct Reference Guide 283Figure 10. Label ID PositionORPrefix SuffixLabel ID Label IDBar Code DataAim IDOptionsLength ControlFixed Length Decoding — When fixed length decoding is enabled, the scannerwill decode a bar code if the label length matches one of the configurable fixedlengths.Variable Length Decoding — When variable length decoding is enabled, the scan-ner will decode a bar code if the label length falls in the range of the configu-rable minimum and maximum length.Configuring Fixed Length Decoding:1. Scan the Enter/Exit Programming Mode bar code.2. Scan the Fixed Length Decoding bar code for the desired symbology.3. Scan the Enter/Exit Programming Mode bar code.4. Set Length 1 to the first fixed length by following the Length 1, Length 2Programming Instructions below.5. Set Length 2 to the second fixed length (or to ‘00’ if there is only one fixedlength) by following the Length 1, Length 2 Programming Instructionsbelow.Configuring Variable Length Decoding:1. Scan the Enter/Exit Programming Mode bar code.2. Scan the Variable Length Decoding bar code for the desired symbology.3. Scan the Enter/Exit Programming Mode bar code.4. Set Length 1 to the first variable length by following the Length 1, Length2 Programming Instructions below.5. Set Length 2 to the second variable length by following the Length 1,Length 2 Programming Instructions below.
