Enter/Exit Programming Mode Micro PDF 417 Length Control268 Magellan™ 3450VSiMicro PDF 417 Length 1, Length 2 Programming InstructionsIf Micro PDF 417 Length Control is set to Fixed-Length decoding, this featurespecifies Micro PDF 417 first fixed length. If Micro PDF 417 Length Control isset to Variable-Length decoding, this feature specifies the minimum labellength.NOTEThis tag is only valid for units with a model ID that supportsPDF.Length 1 is the minimum label length if in variable lengthmode, or the first fixed length if in fixed length mode. Length 2is the maximum label length if in variable length mode, or thesecond fixed length if in fixed length mode. Length includesthe bar code's data characters only. Any value > 0366 will beconsidered to be 0366.To set this feature:1. Scan the ENTER/EXIT Programming Mode bar code.2. Scan the bar code, Set Micro PDF 417 Length 1 on page 268 or Set MicroPDF 417 Length 2 on page 268 below. You’ll need to cover any unused barcodes on this and the facing page to ensure that the scanner reads onlythe bar code you intend to scan.3. Scan the appropriate digits from the Alpha-Numeric Keypad in Appendix Cthat represent the desired label length. The selectable range for thisoption is 0001 to 0366. Pad all numbers with leading zeros to yield a four-digit entry (0001-0366).4. Complete the programming sequence by scanning the ENTER/EXIT Pro-gramming Mode bar code.Default setting for this feature = 00010350(CR)Set Micro PDF 417 Length 10351(CR)Set Micro PDF 417 Length 2Default setting for this feature = 016E
