2 Magellan™ 8300/8400Chapter 5, Calibration , explains scale calibration and verificationprocedures, including procedures for calibrating the scale inpounds as well as kilograms.Chapter 6, Programming , highlights the function(s) of each pro-grammable feature and provides a dedicated set of bar codes forconfiguring scanner and scanner/scale features. This chapter isorganized by the categories: General Features, Interface RelatedFeatures and Symbology Related Features.Appendix A, LED/Beeper Indications & Controls , containstables describing the various functions and indications of the scan-ner/scale control panel features.Appendix B, Cable Information , references wire requirements,connector specifications and pinout details for product cabling.Appendix C, Keypad , is a set of bar codes representing the digitsand characters required to enter extended programming dataneeded during certain programming sessions.Appendix D, Host Commands , furnishes a partial listing of avail-able host commands that can be used with a compatible host inter-face.Appendix E, Keyboard Function Key Mappings, summarizes thekeyboard models, their defined protocol, scancode set, and someunique features. Other tables in this chapter provide the functionkey maps associated with each of the scancode sets.Appendix F, Factory Defaults, lists factory default programmablesettings for common interfaces.Appendix G, Handheld Data Format Requirements , containsapplication notes describing the general format of data accepted bythe scanner through the auxilliary port as transmitted from a hand-held scanner.How to Use This ManualReference the first chapter of this manual for a general descriptionof the product’s features and an outline of the manual’s contentsand organization. View the remaining chapters for proceduresregarding scanner or scanner/scale installation, operation, mainte-nance, calibration and bar code programming.
