Datalogic Magellan 8300 Product Reference Manual

Also see for MAGELLAN 8300: Product reference guide Product reference guide Quick start guide Quick reference guide Technical guide

Contents

Datalogic Magellan 8300 Product Reference Manual Manual pdf 361 page image

DataBar Omnidirectional EnableProduct Reference Guide 349DataBar Omnidirectional Label IDThis feature specifies an DataBar Omnidirectional label ID to beadded to bar code data.To set this feature:To set this feature:1. Scan the SWITCH bar code.2. Scan the bar code, SET DataBar Omnidirectional LABEL ID onpage 349 below. You’ll need to cover any unused bar codes onthis and the facing page to ensure the scanner reads only thebar code you intend to scan.3. Scan the appropriate digits from the keypad in Appendix Cthat represent the desired Label ID characters; entered as twohex pairs. A table containing the ASCII Character Set on page 1and their corresponding Hex Values is available in the insideback cover of this manual. ASCII parameters must be input byscanning a pair of hexadecimal digits for each character. Thus,to set a two-character value of AB, bar codes containing thedigits ‘4’, ‘1’, ‘4’, and ‘2’ must be scanned. The selectablerange for this option is any hex value from 00 to FF.4. Complete the programming sequence by scanning the SWITCHbar code.SET DataBar Omnidirectional LABEL IDNOTEThe programming feature, Label ID Control, designates whether theLabel ID is transmitted as a prefix or suffix or if Label ID is disabled.