Datalogic PD9330 Product Reference Manual

Also see for PBT9300 Series: Quick reference guide

Contents

Datalogic PD9330 Product Reference Manual Manual pdf 42 page image

Enter/Exit Programming Mode32 PowerScan™ PD9330/PBT9300/PM9300ACK CharacterThis setting specifies an ASCII character or hex value to be used as the ACKcharacter. ASCII characters or any hex value from 0 to 0xFF can be selected.See page 257 for more information.$CR2ACSelect ACK Character SettingDEFAULT 0x06 ‘ACK’ CharacterSetting to previously defined characters such as XON, XOFF, or host commands conflicts withnormal operation of these characters. 8-bit data is not recognized when the option Data Bitshas been set as 7 Data Bits.NAK CharacterThis setting specifies an ASCII character or hex value to be used as the NAKcharacter. ASCII characters or any hex value from 0 to 0xFF can be selected.Setting to previously defined characters such as XON, XOFF, or host commands conflicts withnormal operation of these characters. 8-bit data is not recognized when the option Data Bitshas been set as 7 Data Bits.See page 258 for more information.$CR2NASelect NAK Character SettingDEFAULT 0x15 ‘NAK’ Character