Installing Drives in the External Bays 8-109Figure 8-11. Connecting an Optional SCSI Controller Card5. Connect the other end of the interface cable to theSCSI drives in the external bays.If you have more than one SCSI device in the exter-nal bays, you should connect the end connector onthe interface cable to the CD-ROM drive and enabletermination for the CD-ROM drive. See “SCSI Con-figuration Guidelines,” in Chapter 9 for instructionson enabling termination.6. Replace the computer cover according to theinstructions in “Replacing the Computer Cover”in Chapter 6.7. Reconnect your computer and peripherals totheir power sources, and turn them on.8. Verify correct operation of your system.Refer to the chapter titled “Running the Diskette-Based Diagnostics” in your Diagnostics andTroubleshooting Guide, and run the appropriatetests in the SCSI Devices Test Group to verify thatthe new SCSI controller is functioning correctly.SCSI controller cardSCSI cableSCSI drivesin the externalbays (2)
