NOTE: Enter the password in the Password field in the Authorization area before sending a fax fromthe Dell MFP Laser 3115cn Fax if the Scan/Fax Set (Setup Admin menu Secure Settings )settings on the Dell Multifunction Color Laser Printer 3115cn have been set. If you do not enter thecorrect password, the fax will not be sent. You can check whether or not the fax was correctly sent onthe Job History Report (Setup Reports Job History ).Receiving a FaxAbout Receiving ModesNOTE: To use the TEL/FAX or Ans/Fax mode, attach an answering machine to the Phone connector () on the back of your multifunction printer.When the memory is full, the fax is received in the TEL mode.Loading Paper for Receiving FaxesThe instructions for loading paper in the paper tray are the same whether you are printing, faxing, orcopying, except that faxes can only be printed on Letter-, A4-, or Legal-sized paper. For details aboutloading paper, see "Loading Print Media ". For details about setting the paper type and size in the tray, see"Print Media Guidelines ".Receiving Automatically in the Fax ModeYour multifunction printer is preset to the fax mode at the factory.When you receive a fax, the multifunction printer answers the call on a specified number of rings andautomatically receives the fax.To change the number of rings, see "Available Fax Settings Options ".If you want to adjust the ringer volume, see "Setting Sounds ".Receiving Manually in the Tel ModeYou can receive a fax by picking up the handset of the external telephone and then pressing the remotereceive code (see "Available Fax Settings Options "), or by setting OnHook to On (you can hear voice or faxtones from the remote machine) and then pressing Start .The multifunction printer begins receiving a fax and returns to the standby mode when the reception iscompleted.Receiving Automatically in the TEL/FAX or Ans/FAX ModeTo use the TEL/FAX or Ans/Fax mode, you must attach an answering machine to the Phone connector ( )on the back of your multifunction printer.
