To set up e-mail alerts:Launch the Dell Printer Configuration Web Tool.1.Click E-Mail Alert link.2.Under Setup E-Mail Lists and Alerts, enter the Primary SMTP Gateway, the Reply Address, and enteryour email address or the key operator's email address in the email list box.3.Click Apply New Settings.4.NOTE: The SMTP server will display Connection in Progress until an error occurs.Determining the Wireless Network SettingsYou need to know the settings for the wireless network to set up the wireless printer. For details of thesettings, contact your network administrator.WirelessSettingsSSID Specifies the name that identifies the wireless network. Up to 32alphanumeric characters.NetworkTypeSpecifies the network type from Ad-hoc or Infrastructure.SecuritySettingsSecurity Selects the security method from No security, WEP, WPA-PSK TKIP and WPA-PSK AES.TransmitKeySpecifies the transmit key from the list.WEP Key Specified the WEP key set used through the wireless network only when WEPis selected for Security.PassPhraseSpecifies the pass phrase of alphanumeric characters from 8 to 63 byteslong only when WPA-PSK is selected for Encryption.NOTE: To set WPA2-PSK as security, select WPA-PSK AES.Wireless Installation using USB connectionNOTE: The optional multi-protocol card with the Wireless LAN Adapter attached must be installed onthe multifunction printer.Step 1. Install a multifunction printer to the already-operating wirelessnetwork (When wireless setting is already set to your computer)Insert the Drivers and Utilities CD into your computer.1.The Drivers and Utilities CD should launch the installation software automatically.If the CD does not automatically launch, click Start Run, type D:\Setup.exe (where D is the drive2.
