Press until >SETUP appears, and then press .a.Press until >Reports appears, and then press .b.System Settings is displayed. Press .c.1.The system settings page is printed.Under the TCP/IP heading, verify the IP address.2.If the IP address is 0.0.0.0, wait for a few minutes to resolve the IP address automatically, and thenprint the System Settings page again.Printer SetupNOTE: When you use IPv6 Mode for network printing, you cannot install the printer driver from theDrivers and Utilities CD. Use the Add Printer wizard in Windows Vista. For details, see "Printing WithWeb Services for Devices (WSD)" in the User's Guide.Insert the Drivers and Utilities CD into your computer to launch the installation software.1.NOTE: If the CD does not automatically launch, click Start Run, and then type D:\setup.exe (whereD is the drive letter of your CD), and then click OK.NOTE: For Windows Vista, click Continue when the User Account Control dialog box appears.Select Network Installation, and then click Next.2.Select Configure New Wired Printer, or Install Driver and Software for existing networkprinter, and then click Next.3.For local installation, select Local Installation, and then click Next.4.For remote installation:Select Remote Installation, and then click Next.a.NOTE: Remote installation between Windows NT and the following operating systems is notsupported.- Windows XP Professional x64 Edition- Windows Server 2003 x64 Edition- Windows Server 2008 x64 Edition- Windows Vista- Windows Vista x64NOTE: Installation on Windows XP Home Edition, Windows Vista Home Basic, Windows Vista HomePremium, Windows Vista x64 Home Basic, and Windows Vista x64 Home Premium is not supported.b.c.
