130Open File ButtonThis button allows you to open a currently saved SDR file. Upon selecting this option, all currentlyloaded SDRs are deleted and only the SDR loaded from the file are displayed. If the file is not avalid SDR file, an error message is displayed.Properties ButtonThis button will force a refresh of the SDR properties and display them in a dialog. Included in theproperties are: IPMI version, Number of SDRs, Last Add Time, Last Erase Time, and Free SpaceRemaining in bytes. If there is an error retrieving the SDR properties, an error message isdisplayed.Reload ButtonThis button will clear the screen of the currently loaded SDRs and reload the SDRs from the BMC.This load procedure is identical to the load procedure that occurs when the viewer is opened.FRU ViewerThe FRU Viewer subtask allows you to view the current FRUs in the system.NOTEThe FRU Viewer task is only available on the local version of the SMU.This task is not available when running the remote version.The FRU Viewer allows you to view the current system FRUs on the target system. The FRUViewer task supports the following:• Viewing the current system FRUs• Viewing the current system FRU properties• Saving the selected FRU to a file• Viewing a saved FRU fileWhen you select the view records subtask from the FRU menu, it immediately retrieves the systemFRUs. In order to discover the system FRUs, the viewer must first scan the system SDRs andsearch the records for FRU locations.After the scan of the SDRs is complete, the viewer starts loading the FRUs. If an error occurswhile searching the SDRs, the viewer will try to load the FRUs based on the locator records found.The following error is displayed:Error searching for FRU device locator records, not all FRUs maybe displayed. Updating your system’s SDRs may correct this problemAs the FRUs are loaded, a dialog window updates you with the progress. A progress window isupdated for every FRU read. The message displayed is updated for each FRU.After the FRUs are loaded, the FRU list and FRU area viewer are displayed. By default, the firstFRU in the list is selected and displayed. If there is an error while retrieving the FRUs, thefollowing message is displayed:Error reading FRU at Device D Bus B ID I
