24Table 2. Feature SummaryFeature DescriptionCompact, high-densitysystemRack-mount server with a height of 2U (3 1/2 inches) and a depth of 28 inchesConfiguration flexibility • 1-2 way capability in low profile and cost effective packaging• Stand-alone system including external I/O slots/disk expansion as needsgrow• Intel Itanium 2 processor support• 16-GB Double Data Rate (DDR) Synchronous Dynamic Random AccessMemory (SDRAM) memory supportServiceability • Front access to hot-swap hard drives• Hot-swap fans• Front access to hot-swap power supplies• Dockable power to main board• System power and reset status LEDs• System ID switch on front panel and LEDs on front and back• Color-coded parts to identify hot-swap and non-hot-swap serviceablecomponentsAvailability • Three PCI-X slots• Three hot-swap 350-W power supplies in a redundant (2+1) configuration• Dual redundant power cords (1+1) when three power supplies are present• Six hot-swap system fans in a redundant (5+1) configuration• Two hot-swap 1-inch Ultra320 SCSI hard drivesManageability • Remote management• Emergency Management Port (EMP)• Intelligent Platform Management Interface (IPMI) 1.5 compliant• Wired For Management (WfM) 2.0 compliant• Remote diagnostics supportUpgradeability andinvestment protection• Supports Intel Itanium 2 processors• Field upgradeable to next generation (Montecito) processor family• Multi-generational chassisSystem-level scalability • Up to 16-GB DDR SDRAM (using 2-GB DIMMs)• One to two Intel Itanium 2 processors• External I/O (3 slots) / disk expansion• External SCSI connectorFront panel • System Power switch and LED• System Reset switch• System Diagnostic Interrupt (SDINT)switch• System ID switch and LED• System Status LED• Hard Drive Fault LED• LAN1 & LAN2 Status LEDs• Video Connector• Dual USB 1.1 Ports
