Diagnostic information 2-59202 .30 Paper jam around thefuser exit or redrivearea. Fuser page countbetween 300,000 and399,999.Page may be jammed in fuser exit orredrive area. • Make sure the redrive dooris complete closed.• Check the fuser for anysigns of wear orcontamination. If any arefound, replace the fuserassembly. See “Fuserassembly removal” onpage 4-27.• Turn media over to reduce+W curl.• Check upper redrivediverter and diverter springfor any signs of damage, aloose spring, or bindingparts. Repair the redrive asnecessary.• Check any installed outputoptions(s) that may beinstalled for correctinstallation and alignment.• The fuser exit sensor maynot be functioning properly.Go to “Fuser exit sensorservice check” onpage 2-92.202 .31 Page did not cleanly exitfuser or redrive area.Fuser page countbetween 300,000 and399,999.Page may be jammed in fuser exit orredrive area. • Make sure the redrive dooris complete closed.• Check the fuser for anysigns of wear orcontamination. If any arefound, replace the fuserassembly. See “Fuserassembly removal” onpage 4-27.• Turn media over to reduce+W curl.• Check upper redrivediverter and diverter springfor any signs of damage, aloose spring, or bindingparts. Repair the redrive asnecessary.• Check any installed outputoptions(s) that may beinstalled for correctinstallation and alignment.• The fuser exit sensor maynot be functioning properly.Go to “Fuser exit sensorservice check” onpage 2-92.User attendance messages—paper jams and paper handling errors (2xx.xx)ErrorcodeSubcodes Description Possible causes Action
