2-2 Service ManualUnderstanding the printer operator panelThe operator panel on your printer is a 4-line back-lit gray scale display that can show both graphics and text.The Back, Menu, and Stop buttons are located to the left of the display, the navigation buttons are locatedbelow the display, and the numeric pad is located to the right of the display.The use of the buttons and the layout of the display panel are described in the following table.Operator panelButton FunctionBackPress the Back button to return to the last screen you viewed.Note: Changes made on the screen will not be applied if you press the Backbutton.MenuPress the Menu button to open the menu index.Note: The printer must be in the Ready state to access the menu index. Amessage indicating the menus are unavailable will appear if the printer is notready.Stop Press Stop to stop the mechanical operation of the printer. After pressing Stop,the message Stopping is displayed. When the printer has stopped, the statusline in the operator panel will show Stopped, and a list of options will appear.Navigation buttonsThe Up or Down buttons are used to move up and down lists.When navigating through a list using the Up or Down button, the cursormoves one line at a time. Pressing the Down button at the bottom of thescreen changes the screen to the next whole page.The Left or Right buttons are used to move within a screen such asmoving from one menu index item to another. They are also used toscroll through text that will not fit on the screen.The Select button is used to initiate action on a selection. Press Selectwhen the cursor appears next to the selection you want such asfollowing a link, submitting a configuration item, or when you want tostart or cancel a job.Navigation buttonsNumeric padDisplay panelIndicator light USB portSelect button
