MOVE THE COMPUTER AND/ OR PRINTER CLOSER TO THE WIRELESS ACCESS POINT ( WIRELESSROUTER )The possible distance between devices in 802.11b or 802.11g networks is 300 feet, while the wireless networkrange potentially doubles in 802.11n networks. The range of your wireless network depends on many factors,including the abilities of your router and network adapters. If you are having trouble printing, try placing thecomputer and printer no more than 100 feet apart.You can find the strength of the network signal on the printer network setup page.C HECK MAC ADDRESSIf your network uses MAC address filtering, make sure that you include the MAC address of the printer in the MACaddress filter list. This will allow the printer to operate on the network.Wi-Fi indicator light is blinking orange during installationWhen the Wi-Fi indicator light is blinking orange, it indicates that the printer has been set up for wireless networkingbut cannot connect to the network for which it has been configured. The printer may be unable to join the networkbecause of interference, its distance from the wireless access point (wireless router), or until its settings are changed.Try one or more of the following:MAKE SURE THE ACCESS POINT IS ONCheck the access point, and if necessary, turn it on.MOVE YOUR ACCESS POINT TO MINIMIZE INTERFERENCEThere may be temporary interference from other devices such as microwave ovens or other appliances, cordlessphones, baby monitors, and security system cameras. Make sure your access point is not positioned too closely tothese devices.MOVE THE COMPUTER AND/ OR PRINTER CLOSER TO THE ACCESS POINTThe possible distance between devices in 802.11b or 802.11g networks is 300 feet, while the wireless networkrange potentially doubles in 802.11n networks. The range of your wireless network depends on many factors,including the abilities of your access point and wireless network adapters. If you are having trouble printing, thentry placing the computer and printer no more than 100 feet apart.You can find the signal strength of the network on the network setup page.C HECK YOUR WEP KEY OR WPA PASSPHRASEIf your access point is using WEP security, then the WEP key should be:• Exactly 10 or 26 hexadecimal characters. Hexadecimal characters are A–F, a–f, and 0–9.or• Exactly 5 or 13 ASCII characters. ASCII characters are letters, numbers, and symbols found on a keyboard.Troubleshooting110
