3 Navigate to:Printer Home > select your printer > Settings tab > Wireless setup utilityNote: You may be prompted to connect the printer to the computer again using the installation cable as partof the setup process.4 Follow the instructions on the computer screen.For Macintosh users1 From the Finder, navigate to:Applications > select your printer folder2 Double-click Wireless Setup Assistant.3 Follow the instructions on the computer screen.Wireless print server not installedYou may see a message during installation indicating that the printer does not have a wireless print server installed.If you are sure the printer is capable of wireless printing, try the following:C HECK POWERMake sure the light is on.“Communication not available” message appears when printingwirelesslyTry one or more of the following:MAKE SURE YOUR COMPUTER AND PRINTER HAVE VALID IP ADDRESSES FOR THE NETWORKIf you are using a laptop and have power-saving settings enabled, then you may see the ”Communication notavailable” message on your computer screen when you attempt to print wirelessly. This can occur if the laptophard drive has powered down.If you see this message, then wait a few seconds and then try to print again. The laptop and printer require a fewseconds to power up again and reconnect to the wireless network.If you see this message again after you have waited long enough for the printer and the laptop to connect to thenetwork, then there may be a problem with your wireless network.Make sure the laptop and printer have both received IP addresses:For Windows users1 Click , or click Start and then click Run.2 In the Start Search or Run box, type cmd.Troubleshooting114
