3 Navigate to:Print Setup tab > Paper Type list > select your paper type4 Navigate to:Paper Size list > select your paper sizeIf no paper size matches the label sheet size, then set a custom size.5 Click OK to close any printer software dialogs.6 Click OK or Print.For Macintosh users1 With a document open, choose File > Page Setup.2 From the “Format for” pop-up menu, choose your printer.3 From the Paper Size pop-up menu, choose your paper size.If no paper size matches the label sheet size, then set a custom size.4 Select an orientation, and then click OK.5 From the menu bar, choose File > Print.6 From the Printer pop-up menu, choose your printer.7 From the print options pop-up menu, choose Print Settings or Quality & Media.8 From the Paper Type pop-up menu, choose Card Stock.9 From the Print Quality menu, choose a print quality other than Quick Print or Draft.10 Click Print.Tips on loading label sheets• Make sure the top of the label sheet feeds into the printer first.• Make sure the adhesive on the labels does not extend to within 1 mm of the edge of the label sheet.• Make sure the paper guide or paper guides rest against the edges of the label sheet.• Use full label sheets. Partial sheets (with areas exposed by missing labels) may cause labels to peel off duringprinting, resulting in a paper jam.Printing on custom-size paperFor Windows users1 With a document open, click File > Print.2 Click Properties, Preferences, Options, or Setup.3 Navigate to:Print Setup tab > Paper Size list > select Custom Size4 Adjust the settings as needed to create a custom size, and then click OK.Printing35
