6 Press the arrow buttons to select the resolution quality and the original image size. Press each time you makea selection.7 Press to start scanning.The scan is complete when the application you selected in step 5 opens on the destination computer, and the scanappears within the application as a new file.Scanning to a flash drive or memory cardBefore you begin, make sure your flash drive or memory card is not write protected.1 Load an original document faceup into the ADF or facedown on the scanner glass.2 From the printer control panel, press .3 Press the up or down arrow button to scroll to Memory Device.4 Insert the flash drive or memory card, and then press .5 Press the arrow buttons to select the resolution quality, the output file type you want to create, and the originalimage size. Press each time you make a selection.Note: Select the PDF file type if you want to scan multiple pages and save them as one file.6 Press to start scanning.The scan is complete when a message appears on the printer control panel indicating that the file you scanned hasbeen saved.Scanning photos into an editing applicationUsing the printer control panel1 Load the photo or photos facedown on the scanner glass.2 From the printer control panel, press .3 Press the left or right arrow button to scroll to USB or the name of the network computer to receive the scan, andthen press .The local or network computer is the destination that will receive the scan.Notes:• You may be prompted to enter a PIN if the computer requires it. Enter the PIN using the keypad.• To assign a computer name and a PIN to the computer, see the Help for the printer software associated withyour operating system.4 Wait until the printer has finished downloading the list of scan applications available on the selected computer.5 Press the left or right arrow button to select a photo editing application, and then press .6 Press the arrow buttons to select the resolution quality, the type of output you want to create, and the originalimage size. Press each time you make a selection.7 Press to start scanning.Scanning54
