c Press the arrow buttons to select whether you want to add a contact manually or import a contact. Presswhen you make a selection.• If you want to add a contact manually, then use the keypad to enter the fax number, and then press .• If you want to import a contact, then press the arrow buttons to select a contact from the Address Bookor the Redial List. Press when you make a selection.d When you are finished adding contacts to the group, select Done.Sending faxesADF Scanner glassUse the ADF for multiple-page documents.Note: The ADF is available only on selected models. If youpurchased a printer without an ADF, load originaldocuments or photos on the scanner glass.Use the scanner glass for single pages, small items (such aspostcards or photos), transparencies, photo paper, or thinmedia (such as magazine clippings).Tips for sending faxesBefore you send a fax:• Make sure that the printer is on and connected to a working telephone, DSL, or VoIP line. The line is working ifyou hear a dial tone.• Load an original document faceup into the ADF or facedown on the scanner glass.• When using the ADF, adjust the paper guide on the ADF to the width of the original document.• When using the scanner glass, close the scanner lid to avoid dark edges on the scanned image.Sending faxes using the printer control panel1 From the printer control panel, press .2 Enter a fax number, or press Address Book to select a number from the Speed Dial or Group Dial list.3 If you want to send a fax to a single recipient, then press .Faxing72
