The scan is complete when the photo editing application you selected in step 5 opens on the destination computer,and the scan appears within the application as a new file.Using the printer software1 Load a photo or photos facedown on the scanner glass.2 Click or Start.3 Click All Programs or Programs, and then select the printer program folder from the list.4 Select Printer Home.5 Choose your printer from the printer drop-down list.6 Click Photo.• If you want to scan a single photo, or multiple photos as a single image, then select Single photo.• If you want to scan multiple photos at once and save them as separate images, then select Split into individualphotos.Note: Allow at least 1/4 inch of space between photos if you want to scan multiple photos at once and savethem as separate images.Scanning starts and the scan progress dialog appears.7 Save the photo or photos and open in a photo editing application to edit.Scanning documents into an editing applicationAn Optical Character Recognition (OCR) application allows you to edit an original text document that has beenscanned. In order for this to work, you must have an OCR application stored on a local or network computer and youmust be able to choose it from the list of applications when you set up the scan.When selecting settings for the scan:• Select to scan to the local computer or network computer where the OCR is installed.• Select to scan to the highest resolution.1 Load an original document faceup into the ADF or facedown on the scanner glass.2 Click or Start.3 Click All Programs or Programs, and then select the printer program folder from the list.4 Select Printer Home.5 Choose your printer from the printer drop-down list.6 Click Document.Scanning starts and the scan progress dialog appears.7 When the scan is finished, save the document in a word-processing application.8 Open the document in the selected application to edit it.Scanning55
