7 Type the IP address you want to assign to the printer in the IP Address field.8 Click the Submit button.The Submitting Selection message appears.To confirm that the address was successfully assigned, type the static IP address in the Web browser address fieldand then press Enter. The printer Web page loads if the address was successfully assigned.For more information, contact your system support person.Changing wireless settings after installationTo change wireless settings on the printer, such as the configured network, the security key, or other settings, do thefollowing:1 Click or Start.2 Click All Programs or Programs, and then select the printer program folder from the list.3 Select Printer Home.4 Click the Settings tab.5 Click the Wireless setup utility link.6 Follow the instructions on the computer screen to configure the printer for wireless access with the new settings.Advanced wireless setupCreating an ad hoc wireless networkThe recommended way to set up your wireless network is to use a wireless access point (wireless router). A networkset up this way is called an infrastructure network. If you have an infrastructure network, you should configure theprinter for use on that network.Note: The printer can communicate on only one wireless network at a time. Configuring the printer for an ad hocwireless network will keep it from working on any other wireless network, either ad hoc or infrastructure.You can set up an ad hoc network if you:• Do not have an access point or wireless router• Do not already have a wireless network (but do have a wireless adapter for your computer)• Want to set up a standalone network between the printer and a computer with a wireless network adapterIn Windows Vista1 Click .2 Click Control Panel.3 Click Network and Internet.4 Under Network and Sharing Center, click Connect to a network.5 Click Set up a connection or network when you are prompted to select a network to connect to.Networking86