2Installing driver over the network• For Windows 8,The machine that does not support the network interface, it will not be able If the installation window does not appear, from Charms, selectto use this feature (see "Rear view" on page 18). Search > Apps and search for Run. Type in X:\Setup.exe, replacing“X” with the letter that represents your CD/DVD drive and click OK.If “Tap to choose what happens with this disc.” pop-up window5Windowsappears, click the window and select Run Setup.exe.Click New Printer.3Make sure that the machine is connected to the network and powered1 on. Also, your machine’s IP address should have been set.If the “Found New Hardware Wizard” appears during the installationprocedure, click Cancel to close the window.Insert the supplied software CD into your CD/DVD drive.The software CD should automatically run and an installation windowwill appear.If the installation window does not appear, click Start > All programs >Accessories > Run.X:\Setup.exe replacing “X” with the letter, which represents your CD/DVD drive and click OK.2. Using a Network-Connected Machine 138
