Printing featuresChange other printing options in each tab, if necessary.7ClickPrint.8Automatic/manual duplex printing may not be available depending onmodels. You can alternatively use the lpr printing system or otherapplications for odd-even printing.Printing filesYou can print many different types of files on your machine using the standardCUPS, directly from the command line interface. The CUPS lpr utility allows youto do that. You can print these files by using the command format below.lp -d -o Please refer to lp or man page on your system for more details.Configuring Printer PropertiesUsing thePrinter Propertieswindow provided by thePrinters configuration,you can change the various properties for your machine as a printer.Open theUnified Driver Configurator.1If necessary, switch toPrinters configuration.Select your machine on the available printers list and clickProperties.2ThePrinter Propertieswindow appears.3The following five tabs display at the top of the window:•General:Allows you to change the printer location and name. Thename entered in this tab displays on the printer list inPrintersconfiguration.•Connection:Allows you to view or select another port. If you changethe machine port from USB to parallel or vice versa while in use, youmust re-configure the machine port in this tab.•Driver:Allows you to view or select another machine driver. ByclickingOptions, you can set the default device options.•Jobs:Shows the list of print jobs. ClickCancel jobto cancel theselected job and select theShow completed jobscheck box to seeprevious jobs on the job list.•Classes:Shows the class that your machine is in. ClickAdd to Classto add your machine to a specific class or clickRemove from Classto remove the machine from the selected class.ClickOKto apply the changes and close thePrinter Propertieswindow.44.Special Features208
