Brocade Adapters Installation and Reference Manual 9753-1002144-01Using software installation scripts and system commands 3This command prints the names of the network driver package (bna) if installed.lspciThis utility displays information about all PCI buses in the system and all devices connected tothem. Fibre Channel: Brocade Communications Systems, Inc. displays for an HBA or FabricAdapter port configured in HBA mode. Fibre Channel: Brocade Communications Systems, Inc.and Ethernet Controller display for a CNA or Fabric Adapter port configured in CNA or NIC modeif driver packages have correctly loaded.lsmodThis command displays information about all loaded modules. If bfa appears in the list, thestorage driver is loaded to the system. If bna appears in the list, the network driver is loaded tothe system.dmesgThis command prints kernel boot messages. Entries for bfa (storage driver) and bna (networkdriver) should display to indicate driver activity if the hardware and driver are installedsuccessfully.7. Start the HCM Agent by using steps under “HCM Agent operations” on page 112.NOTEManually installing the driver package with installation scripts does not automatically start theHCM Agent.8. When the driver is installed and the system is connected to the fabric, verify adapter operation.Verify LED operation for stand-up adapters by referring to “Adapter LED operation (stand-upadapters)” on page 184.Upgrading driver on Linux systemsTo update the driver package simply install the new driver and HCM package using steps under“Driver installation and removal on Linux systems” on page 95.NOTEWhen upgrading the driver for Linux systems, you do not need to reboot the host system. The newdriver is effective after system reboot.Driver installation and removal on Solaris systemsUse the following steps to install, remove, and upgrade the driver and utility packages on Solarissystems.NOTEBrocade 804 and 1007 adapters are not supported on Solaris systems, so Solaris options do notapply to these adapters.Installing driver packages on Solaris systemsUse the following steps to install driver and utility packages to Solaris systems. Driver packagesinstall as the following:• Storage drivers - bfa_driver__.pkg
