Brocade Adapters Installation and Reference Manual 11353-1002144-01HCM Agent operations 3• Starting the agent (agent restarts if system reboots).chkconfig –-add hcmagentservice• Stopping the agent./usr/bin/hcmagentservice stop• Stopping the agent from restart after system reboots.chkconfig –-del hcmagentservice• Changing the default communication port. Use the following steps.a. Change to the agent installation directory (default is/opt/brocade/adapter/hbaagent/conf).b. Edit abyss.conf to change the entry “SecurePort 34568” to any other nonconflictingTCP/IP port (for example, SecurePort 4430).Managing the HCM Agent on Solaris systemsUse the following commands:NOTEThe Brocade 804 and 1007 adapters are not supported on Solaris systems, so Solaris options donot apply.• Determining agent operationsvcs hcmagentservice• Starting the agent (agent will not restart if system reboots or agent stops unexpectedly)svcadm enable -t hcmagentservice• Starting the agent (agent restarts if system reboots)svcadm enable hcmagentservice• Stopping the agentsvcadm disable -t hcmagentservice• Stopping the agent from restart after system rebootssvcadm disable hcmagentservice• Changing the default communication porta. Change to the agent installation directory (default is/opt/brocade/adapter/hbaagent/conf).b. Edit abyss.conf to change the entry “SecurePort 34568” to any other nonconflictingTCP/IP port (for example, SecurePort 4430).
