Brocade Adapters Installation and Reference Manual 1353-1002144-01Host bus adapters 1Using Brocade HBAs, you can connect your host system to devices on the Fibre Channel SAN. Thecombined high performance and proven reliability of a single-ASIC design makes these HBAs idealfor connecting hosts to SAN fabrics based on Brocade Fabric or M-Enterprise operating systems.NOTEThis publication only supports the HBA models listed in Table 5, and does not provide informationabout the Brocade 410 and 420 Fibre Channel HBAs, also known as the Brocade 400 Fibre ChannelHBAs.Stand-up modelsFigure 6 on page 13 illustrates major components of the Brocade 825 stand-up model HBA. Pleasenote that the following illustration is representative and may have minor physical differences fromthe HBA that you purchased.FIGURE 6 825 HBA with low-profile mounting bracket (head sink removed)1 LEDs for port 1 SFP2 Fiber optic cable connectors for port 1 and port 0 SFPs3 LEDs for port 0 SFP4 Low-profile mounting bracket. Note: The HBA ships with the low-profile mounting bracket installed.5 PCIe x8 PCIe connector6 ASIC7 Serial number label8 Label showing PWWN for each port.
