Scanning 249Scanning From the Operator Panel - Using WSDIf the printer is connected to a computer via network using Web Services on Devices (WSD) protocol, you can usethe protocol to send scanned images to a computer.NOTE: To scan using WSD, you need to setup connection using WSD.NOTE: WSD is supported only on Windows Vista®, Windows 7, Windows 8, and Windows 8.1.Printer Setup for Scanning via WSDSetup the printer and computer for connection using WSD.Checking the Printer SettingSet WSD to Enable in the printer settings. See "Protocol" on page 179 for details.Setting Up the ComputerNOTE: For Windows 8 and Windows 8.1, the computer automatically connects the printer using WSD. There is no need to installthe printer manually.For Windows 7:1 Click Start → Computer → Network2 Right-click the icon for the printer, and then click Install. The printer is connected using WSD.For Windows Vista:1 Click Start → Network2 Right-click the icon for the printer, and then click Install.3 Click Continue. The printer is connected using WSD.
