Troubleshooting 349Print Quality ProblemsNOTE: In this section, some procedures that use the Tool Box can also be performed using the operator panel orDell Printer Configuration Web Tool. For information on how to use the operator panel and Dell Printer Configuration Web Tool,see "Understanding the Printer Menus" on page 163 and "Dell™ Printer Configuration Web Tool" on page 97.The output is too lightAction Yes No1 The toner cartridges may be low or need to be replaced. Confirm theamount of toner in each toner cartridge.a Check the toner level in the Status tab in the Status Monitor.b Replace the toner cartridges as necessary.Is the problem recovered?The task is complete. Go to action 2.2 Verify that the print media is not damp and the correct print media isused. See "Supported Paper Types" on page 209. If not, use the printmedia recommended for the printer.Is the problem recovered?The task is complete. Go to action 3.3 Verify that the Paper Type setting in the printer driver matches the printmedia you loaded.a On the Paper/Output tab in Printing Preferences of the printerdriver, check the Paper Type setting.b Load dry (not damp) and corrected print media, and then click PrintTest Page in Printer properties of the printer driver.Is the problem recovered?The task is complete. Go to action 4.4 Disable the Toner Saving Mode in the printer driver.a On the Graphics tab in Printing Preferences of the printer driver,ensure that the Toner Saving Mode check box is not selected.Is the problem recovered?The task is complete. Contact Dell.
