Appendix 111Memory Info Displays the amount of Installed Memory, Memory Speed, MemoryChannel Mode, and a description of the Memory Technology. This optionalso displays a table that describes the memory size, whether the memorymodule is ECC capable, single or dual rank, type, and organization.PCI Info Displays the contents of each PCI slot.Date/Time Controls the system’s internal calendar and clock.Boot Sequence(Diskette drive default)Determines the order in which the system searches for boot devices duringsystem startup.NOTE: If you insert a boot device and restart the computer, this option appearsin the system setup menu. To boot from a USB memory device, select the USBdevice and move it so it becomes the first device in the list.DrivesDiskette Drive(Internal default)Enables and disables the floppy drives and sets read permission for theinternal floppy drive.• Off — disables all floppy drives• USB — enables the USB floppy drive• Internal — enables the internal floppy drive• Read Only — enables the internal drive controller and allows the internalfloppy drive read-only permissionNOTE: Operating systems with USB support will recognize USB floppy drivesregardless of this setting.Drives 0 through 3(On default)Enables or disables an ATA or SATA device (such as hard-drive, CD drive, orDVD drive). On enables the interface so that the device can be used.Displays the Controller type (ATA or SATA), Port number the drive isusing, Drive ID number, Capacity, and whether the drive is controlled bythe BIOS.SATA Operation(RAID Autodetect/ATAdefault)Identifies and defines the SATA controller settings for RAID. You can setthe SATA controller to RAID Autodetect/ATA or RAID On.
