Dell DIMENSION E510 DCSM Owner's Manual

Also see for Dimension 5150: Setup guide System information guide Owner's manual Owner's manual Setup guide

Contents

114 AppendixAuto Power On(Off default)Sets the computer to automatically turn on.• Off — disables the Auto Power On feature• Everyday — turns the computer on every day at the time set in Auto PowerTime• Weekdays — turns the computer on every day from Monday through Fridayat the time set in Auto Power TimeNOTE: This feature does not work if you turn off your computer using a powerstrip or surge protector.Auto Power Time Sets time to automatically turn on the computer.Time is kept in the standard 12-hour format (hours:minutes). Change thestartup time by pressing the right- or left-arrow key to increase or decreasethe numbers, or type numbers in both the date and time fields.Suspend Mode(S3 default)Sets the computer’s suspend mode.• S1 — sets the computer to a suspend state where the computer is runningin a low-power mode• S3 — sets the computer to a standby state where the power is reduced orturned off for most components; however, system memory remains activefor both settingsMaintenanceSERR DMI Message(On default)Controls the SERR DMI message mechanism.NOTE: Some graphics cards require that the SERR DMI message mechanismbe disabled.Load Defaults Restores System Setup options to their factory defaults.Event Log Allows you to view the Event Log. Entries are marked R for Read and U forUnread. Mark All Entries Read puts an R to the left of all entries. ClearLog clears the Event Log.POST BehaviorFastboot(On default)When enabled, this feature reduces computer startup time by bypassingsome compatibility steps.• Off — does not skip any steps during computer startup• On — starts the system more quicklyNumlock Key(On default)Determines the functionality of the numeric keys on the right side of yourkeyboard.• Off — commands the right keypad keys to function as arrows• On — commands the right keypad keys to function as numbers