– Email– Work Phone– Comments– Notify me of [DR4000/DR4100] appliance alerts– Notify me of [DR4000/DR4100] software updates– Notify me of [DR4000/DR4100] daily container stats reportsPasswordThe Password Management pane displays the current Reset Password Option set for the system. The Reset PasswordOption can be:• Service Tag Only• Service Tag and Administrator EmailNOTE: To select the option Service Tag and Administrator Email, you must first configure the e-mail relay hostand administrator contact e-mail.In the Password Management pane you can edit the current password and edit the password reset options.Email Relay HostThe Email Relay Host pane displays the current email relay host configured for the DR Series system. The Email RelayHost pane title acts as a link to the Email Relay Host page:• This page lists the configured email relay host by its IP address or hostname that is responsible for email in the DRSeries system. The Email Relay Host page provides the Add Relay Host option (which after you configure it, thisoption changes to Edit Relay Host).Date and TimeThe Date and Time pane displays the current Mode configured for the DR Series system (Manual or NTP), the currentTime Zone, and the current Date and Time (in mm/dd/yy hh:mm:ss format, for example: 12/11/12 14:58:22 PST). The Dateand Time pane title acts as a link to the Date and Time page:• This page contains a Settings pane that lists the Mode used. The system uses Network Time Protocol (NTP) serversif the system is part of a workgroup and not joined to an Active Directory Services (ADS) domain. If the system isjoined to an ADS domain, then the NTP servers setting is disabled and the system uses the ADS domain time. TheSettings pane also displays the current Time Zone, and current Date and Time. The Date and Time page provides theEdit option for changing the date and time settings.NOTE: Dell recommends using the Network Time Protocol (NTP) servers when the DR Series system is part of aworkgroup and not part of a domain. The NTP time mode is disabled when the DR Series system is joined to anActive Directory Services (ADS) domain. Any attempt to enable the NTP time mode when you are joined to an ADSdomain displays an error message indicating this is not possible.Understanding the System Configuration Page OptionsThe System Configuration page contains three key system options:• Password Management• Shutdown• RebootEdit PasswordEdit Password—click this option to display the Edit Password dialog, where you can change the login password for theDR Series system64
