DocumentationRemote Wake UpThis option allows the computer to power up when a NIC or Remote Wakeup-capable modem receives awake up signal.On is the default setting. On w/ Boot to NIC allows the computer to attempt to boot from a networkprior to using the boot sequence.NOTE: Normally, the system can be powered up remotely from suspend mode, hibernate mode, or whenpowered off.Quick ResumeThis feature enables/disables the Intel® Viiv™ Quick Resume Technology.The default setting is Off.MaintenanceService Tag Displays the system service tag which is a unique seven-digit alphanumeric systemidentifier.SERR Message Controls SERR message mechanism to support some add-in cards.Load Defaults Allows you to reset all options in the setup menu to the factory default.Event Log Displays the system event log.POST BehaviorFastboot When set to On (default), your computer starts more quickly because it skips certain configurations andtests.Numlock KeyThis option involves the rightmost bank of keys on your keyboard. When set to On (default), this optionactivates the numeric and mathematical features shown at the top of each key. When set to Off, thisoption activates the cursor-control functions labeled on the bottom of each key.POST Hotkeys This option allows you to specify the function keys to display on the screen when the computer starts.Keyboard Errors This option disables or enables keyboard error reporting when the computer starts.Boot SequenceThis feature allows you to set the order in which the BIOS will search devices when trying to find an operating system.NOTICE: If you modify any boot sequence settings, save the new settings to avoid losing the changes.Option Settingshttp://support.dell.com/support/edocs/systems/dim9200/en/SM_EN/syssetup.htm (6 of 11) [12/9/2007 11:19:53 PM]