Documentation1 power cable 2 hard drive cable9. Check all connectors to be certain that they are properly cabled and firmly seated.10. Replace the computer cover (see Replacing the Computer Cover).NOTICE: To connect a network cable, first plug the cable in to the network wall jack and then plug the cable intothe computer.11. Connect your computer and devices to electrical outlets, and then turn them on.See the documentation that came with the hard drive for instructions about installing any software required for theoperation of the hard drive.Adding a Second Hard DriveCAUTION: Before you perform any of the procedures in this section, follow the safety instructions in theProduct Information Guide.CAUTION: To guard against electrical shock, always unplug your computer from the electrical outletbefore opening the cover.NOTICE: To avoid damage to the drive, do not set it on a hard surface. Instead, set the drive on a surface, such as afoam pad, that will sufficiently cushion it.1. Check the documentation for the drive to verify that it is configured for your computer.http://support.dell.com/support/edocs/systems/dim9200/en/SM_EN/parts.htm (32 of 68) [12/9/2007 11:22:24 PM]
