Dell Dimension 9200 Service Manual

Also see for 9200: Owner's manual Owner's manual Setup guide Owner's manual Getting started guide

Contents

Documentation1. Follow the procedures in Before You Begin.2. Lay the computer on its side so that the system board is on the bottom of the inside of the computer.3. Remove the computer cover (see Removing the Computer Cover).4. Remove the drive panel (see Removing the Drive Panel).5. Remove the drive panel insert (see Removing the Drive-Panel Insert).6. Remove the Media Card Reader from its packaging. Remove the shoulder screws from the inside of the drive-panelinsert and attach the screws to the new drive.1 Media Card Reader 2 shoulder screws (4)7. Gently slide the drive into place until you feel a click or feel the drive securely installed.Ensure that the Media Card Reader is installed before the USB cable is connected.8. Connect the USB cable to the back of the Media Card Reader and to the USB connector on the system board (seeSystem Board Components).http://support.dell.com/support/edocs/systems/dim9200/en/SM_EN/parts.htm (40 of 68) [12/9/2007 11:22:24 PM]